Installation guides for YAKKT modular aluminium roof racks designed for the VW Crafter (2017-current) and MAN TGE platform. The Crafter and TGE share the same chassis, so all hardware and fitment steps are identical between the two vehicles.
About this platform
- Mounts to the factory M8 t-nut points on the roof — no drilling required.
- MWB has 20 fixing points; LWB has 26.
- Same install process whether you’re fitting to a Crafter or a TGE.
- Two rack tiers fit both vehicles: PRO (current — wider front fairing, accepts a full-width LED light bar) and CORE (the original — slimmer front fairing, no LED bar cutout).
Choose your install guide
- VW Crafter & MAN TGE MWB PRO Roof Rack
- VW Crafter & MAN TGE LWB PRO Roof Rack
- VW Crafter & MAN TGE MWB CORE Roof Rack
- VW Crafter & MAN TGE LWB CORE Roof Rack
Tools you’ll need (across all variants)
- A second pair of hands (one person under the van holding the spanner)
- A ladder
- Heat gun
- Trim removal tool or flathead screwdriver
- M8 / 13mm socket and spanner
- M6 / 10mm socket and spanner
- Impact driver
- H5 hex drive
- 4mm hex drive
Need help?
Email info@yakkt.com or WhatsApp +44 7871 319441 — happy to walk you through it.
